3M 425 is a general purpose aluminum foil tape with a dead soft aluminum foil backing coated with transparent synthetic acrylic pressure sensitive adhesive.


This material provides excellent heat and light reflection as well as strong adhesion for a long service life both indoors and outdoors.

3M 425 aluminum foil tape is conformable and resists flame, moisture, weather, UV degradation, and many chemicals. This foil tape is used in many industries including electronics, appliance, aerospace, transportation, specialty vehicle, and general industrial. 

3M 425 Aluminum Foil Tape Applications:

  • EMI/RFI Shielding
  • Sealing Plate Edges Against Solvent Penetration
  • Maximize Cooling Efficiency of Regrigerators
  • Dryer Blower Housing Sealant
  • Engine Heat Shielding
  • Aircraft Paint Stripping Masking
  • Moisture Barrier
  • Much More

3M 425 provides a long lasting reliable bond in both indoor and outdoor environments. This material has an operating temperature range of -65 degrees Fahrenheit to 300 degrees Fahrenheit and is flame resistant meeting UL 746C and 723 standards.

Converting 3M 425

3M 425 can be die cut and converted into custom formats depending on your needs.

SlittingStrouse can slit rolls of aluminum foil tape to custom widths. This provides you tape in the exact width you need for your task at hand. No excess or waste and no more using rolls that are too large and bulky or too small to get the job done.

Die CuttingThis is the process of cutting a wide roll of aluminum foil tape into a custom shape or usable part for your process. Parts can be cut into different formats to fit seamlessly into your process.

Individual pieces – Foil tapes can be laminated with liner on the adhesive leaving no exposed adhesive. This means that when parts are die cut they are provided as individual pieces that can be placed inside a bag.

Sheeted Parts – Some assembly processes require multiple shapes or parts of the same material. This is where sheeted parts come in handy. Multiple parts can be cut onto a single sheet ensuring that your employees will use all of the required parts during assembly. This reduces error in your process as well as the potential for product failure.

Die Cut Parts on a Roll – This is our most popular format for providing die cuts. Custom cut parts can be provided on a liner in the form of a rolled good. This allows for hundreds or thousands of parts to fit on a single roll. This makes application of die cut parts easy and efficient as parts can be removed from the roll and the next part is ready to be peeled and placed.

Tabs or Extended Liners: Die cut solutions are great for hand assembly or automated processes but sometimes removing the backing from an adhesive die cut can be difficult. Strouse simplifies this process by adding a tab to the part or extended liners that make it easy to remove the liner and place the adhesive. Liners can also be split backed saving your assembly team the frustration of removing thin liners while saving you time and money in the process.

Check out these other popular Aluminum Foil Tapes