3M 4905 VHB is a general purpose, clear colored, Very High Bond tape that has adhesive on both sides and works great on high surface energy substrates.

adhesive-transfer-tape

3M VHB is designed to replace rivets, welding, liquid adhesives, and fasteners. 3M 4905 is used for bonding, attaching, and mounting and can be used for interior and exterior bonding of materials and as a heavy duty mounting tape.

3M 4905 VHB Tape Features:

  • Clear Colored Adhesive for a Clean Appearance
  • Acrylic Based Adhesive that Sticks to Many Different Surface Types
  • Damps Sound When Compared to Fasteners Which Tend to Rattle When Loosened
  • Withstands Temperatures up to 300°F (66°C) Short-term and 200°F for Long-term Use
  • 3M 4905 is at 50% Bond Strength after 20 Minutes and Creates a Permanent Bond After 3 Days
  • Much More

Converting 3M 4905

3M 4905 can be easily die cut and converted into custom formats depending on your needs.

Slitting: Strouse can slit rolls of VHB to custom widths. This provides you bonding tape in the exact width you need for your project. No excess, waste, or cutting necessary for your employees. 

Spooling: This unique capability allows Strouse to combine multiple rolls of VHB into one large spooled roll or reel. Much like fishing line is neatly wrapped around a reel; spooling neatly wraps VHB onto a wider core allowing for longer length rolls of material. This can save you time and money reducing changeovers of rolls while keeping your machines running longer.

Die CuttingThis is the process of cutting a wide roll of tape into a custom shape or usable part for your process. Parts can be cut into different formats to fit seamlessly into your assembly.

Individual pieces – VHB tapes can be laminated with liner on both sides leaving no exposed adhesive. This means that when parts are die cut they are provided as individual pieces placed inside a bag. 

Sheeted Parts – Some assembly processes require multiple shapes or parts of the same material. This is where sheeted parts come in handy. Multiple parts can be cut onto a single sheet ensuring that assemblers will use all of the required parts during assembly. This reduces error in your process as well as the potential for product failure.

Die Cut Parts on a Roll – This is our most popular format for providing die cuts. Custom cut parts can be provided on a liner in the form of a rolled good. This allows for hundreds or thousands of parts to fit on a single roll. This makes application of die cut parts easy and efficient as parts can be removed from the roll and the next part is ready to be peeled and placed.

Tabs or Extended Liners: Die cut solutions are great for hand assembly or automated processes but sometimes removing the backing from an adhesive die cut can be difficult. Strouse simplifies this process by adding a tab to the part or extended liners that make it easy to remove the liner and place the adhesive. Liners can also be split backed saving your assembly team the frustration of removing thin liners while saving you time and money in the process.